CALL WAITING,
EXTERNAL (From the phone company)
Call Waiting
feature must be provided by your Local Telephone Company. This feature requires
prior setup by a technician in your telephone system programming.
During a conversation, a call waiting tone is received signaling another call
is waiting. You can answer the second call using the appropriate
instructions below depending on which telephone system you are using. Not sure which system you have, click here.
|
KX-TDA, KX-TDE,
KX-NCP, KX-TAW Multi-Line System Phone: Press FLASH Single-Line Phone: Flash the hook switch or press FLASH, press STAR 60 |
|
KX-TD 308, KX-TD
816, KX-TD 1232, KX-TD 500 and KX-TA 1232 Analog System Multi-Line System Phone: Press FLASH Single-Line Phone: Flash the hook switch or press FLASH, press STAR 6 |
|
KX-TA 308, KX-TA
624, KX-TA 824, KX-TA 824 Multi-Line System Phone: Press FLASH Single-Line Phone: Flash the hook switch or press FLASH, press STAR 6 |
|
KX-T308
KX-T 616 KX-T 1232 Multi-Line System Phone: Press FLASH Single-Line Phone: Flash the hook switch or press FLASH, press STAR 6 |
|
FLASH HOOK SWITCH: When you are on a call and hear the call waiting signal, depress the hook switch for about 1/2 second and release, you are connected to the second call and the first caller is on hold at the phone company central office. Do it again to switch back and forth. If your single-line phone has a FLASH key, this is the same as flashing the hook switch. On a cordless phone you may need to use the on/off button to flash the phone company central office. Remember, you need to dial 6 or STAR 60 after the flash. |