PanasonicHelp.com

Station Speed Dial, 74XX Series Display Phones - KX-TD System

How do I program and use station speed dial on my display phone?

Station Speed Dial is a feature on the digital systems that allows you to have up to 10 speed dial numbers stored at your extension.  These numbers are not on buttons and require you to use your display or a 3 digit code to call each number.  The chart below shows how to use the display and jog wheel to call the number.  When storing, remember to dial 9 (or another line access code) for an outside line.

 

KX-TD Station Speed Dial Number Storage

For Display phones

 

To Enter Numbers

  1. PROGRAM 99 (or PAUSE 99)
  2. STAR, STAR, speed code 0 to 9
  3. Line Access Code (usually 9) 
  4. Dial the number as you normally would
  5. Press the AUTO DIAL/STORE button
  6. Press the soft key below NEXT
  7. To Enter Names
    1. Press the number on the dial pad that is closet to the letter, such as 5 for L or 9 for W.  Once you press the number, three letters will be displayed.
    2. Press the soft key below the letter you want to keep or turn the jog wheel until the correct letter appears either in upper or lower case.
    3. When the correct letter is there, go to the next number/letter etc.  The SPACE is under 0 if you need to place a space between characters. (10 max)
  8. Press AUTO DIAL/STORE

 

Using station Speed Dial

 
  1. Press SHIFT until you see STA  EXT  FEAT on the display
  2. Press the softkey below STA
  3. Turn the Jog Wheel until you see the name you want to call

Either lift the handset, press SP-PHONE or press the softkey below CALL

OR

INTERCOM 3 *

Code (0 to 9)